Type the Username and Password and click Log In to successfully logon to CMC.Now Launch a web browser, in the address bar type or followed by the IP address of the CMC as configured above, and press Enter to get the CMC log-in page as shown below:.Root# set system services web-management https port 443 system-generated-certificate interface em0.0 Root# set system services web-management http port 80 interface em0.0 At the confirm commit prompt, enter Yes to continue or No to discard your edits and exit the ezsetup script.Ĭommiting the new configuration, please wait.Option 'No' will allow user to come out of EZSetup wizard. Time Zone, Enter 'yes' to choose Timezone from list:Ĭhoosing option 'yes' will add new configuration to existing configuration. Default :Įnter System Time and Date YYYY:MM:DD:hh:mm:ss : * Press ENTER key to ignore the option and continue.

* Prompts that contain denotes that the option is not mandatory. * Press ENTER key to accept the default values. * In the wizard, default values are provided for some options. * To exit the EZSetup wizard press CTRL+C. Your affordable IT Hardware store for all of your IT. * Once you complete EZSetup, the chassis can be accessed over the network. Buy MAG4610 - Juniper Junos Pulse Gateway Appliance products in high quality from Global Tech Devices. * Use the EZSetup wizard to configure the identity of the chassis. Follow the script prompts as shown below:

Repeatedly press Enter until you see a system command prompt.

Configure a console terminal or terminal emulation utility running on a computer, such as HyperTerminal, to use the following serial connection parameters:.

When the CMC has been installed in the chassis, a R S-232 serial cable needs to be connected from the console port on the CMC to the serial port on the management device and the following commands need to be run to configure CMC:

Junos pulse gateway